We ran into this issue when our concrete footings and post pads were being poured. Everyone on the building site needs to know what date version of the plans they should be using. The date is very important especially when you make changes to your plans. This is where you will write the name of the view you are drawing (floor plan, elevation, cross section), the scale of the drawing, the name of the house (could just be the family name), designer's name and date. The lower right hand corner of your drawing you will save for your title block. Lay the sheet down on your working surface with the longest edge running horizontally. To make your own blueprint floor plans, use a sheet of paper 24" by 36". So for this purpose make sure that you use you scale accurately for every line you draw. But building trades people will often use an architect's scale (or ruler) while they are building to check various dimensions on your drawings. When finished your drawings must have all room dimensions accurately marked. This line would measure 9 inches on your drawing and would represent 36 feet for the built house.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |